Bykski N-PT3090GR-TC Palit RTX3090 GameRock OC Full Coverage GPU Water Block & Active Backplate

Bykski Full Coverage GPU Water Block w/ Integrated Active Backplate for Palit RTX 3090 GameRock OC. This full coverage block directly cools the video cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM) on both sides of GPUs. By directly cooling these components you can achieve great temperatures along with the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps. The block and active backplate are constructed of high-purity electroplated copper to prevent oxidation. A high-flow design allows multiple blocks to run in series. Access to top and bottom G1/4″ threaded ports is required on the bridge block. SPECIFICATIONS Block Material: Electroplated High Purity Copper / Clear Acrylic Active Backplate Material: Electroplated High Purity Copper / Clear Acrylic COMPATIBILITY (Including but not limited to the following models) Palit RTX 3090 Game Rock OC Palit RTX Game Rock Palit RTX 3080Ti Game Rock Palit RTX 3080Ti Game Rock OC Please check over the entire PCB picture after narrowing your selection to ensure compatibility. If you have any questions, please contact support for confirmation. Compatibility based on these circuit board designs only Fittings: G1/4″ thread PARTS INCLUDED 1x Full Coverage GPU Water Block 1x Active Backplate Block 2x Stop Fitting 1x Mounting Hardware 1x 5v A-RGB (RBW) Light (Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage. Note! Bykski LED modules always operate with 5 Volt. For hassle free running you always need a 3-pin 5 Volt ADD-Header or compatible controller. Attention! If you connect the 5 Volt LED model with a 12 Volt power, the 5 Volt module will be destroyed by the overload!