Bykski A-RADEON-VII-X AMD RADEON VII Full Coverage GPU Water Block

The Bykski AMD RADEON VII Full Coverage GPU Water Block is a work of art! This full coverage block, directly cools the video cards core (GPU), graphics memory (RAM) as well as voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures! Along with these temperatures comes the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps. The block is constructed of high purity electroplated copper to prevent oxidation. A high flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups. FEATURES Finest Craftmanship SLI/Crossfire Compliant SPECIFICATIONS Model: A-Radeon-VII-X Brand: Bykski Material: Electroplated High Purity Copper / Clear Acrylic COMPATIBILITY Loop: Non-Aluminum (Including but not limited to the following models) AMD RADEON VII (full compatibility will be updated ASAP) Fittings: G1/4″ thread Stock Backplates: Due to mounting variances between cards, stock backplates are not guaranteed to fit PARTS INCLUDED 1x Full Coverage GPU Water Block 2x Stop Fitting 1x Mounting Hardware 1x 5v Addressable RGB (RBW) Note! Bykski LED modules always operate with 5 Volt. For hassle free running you always need a 3-pin 5 Volt ADD-Header or compatible controller Attention! If you connect the 5 Volt LED model with a 12 Volt power, the 5 Volt module will be destroyed by the overload! Some manufacturers stick a protection foil on the backside of their CPU/ GPU coolers. This foil must be removed before mounting. Bykski does not assume any liability for improper use or faulty assembly